RKE2 CIS 1.6 Benchmark - 自我评估指南 - Rancher 2.6

CIS 1.6 Kubernetes Benchmark - Rancher 2.6 RKE2 与 Kubernetes 1.21 到 1.23

点击此处下载本文档的 PDF 版本。

概述

本文档是 Rancher 2.6 RKE2 安全强化指南的配套文件。强化指南（Hardening Guide）为通过 RKE2 配置集群的 Rancher 强化生产安装提供了说明，本 Benchmark 指南旨在帮助你根据 Benchmark 来评估强化集群的安全级别。

本指南对应以下强化指南、Rancher、CIS Benchmark 和 Kubernetes 版本：

强化指南版本	Rancher 版本	CIS Benchmark 版本	Kubernetes 版本
强化指南 CIS v1.6 Benchmark	Rancher v2.6.5+	CIS v1.6	Kubernetes v1.21 到 v1.23

由于 Rancher 和 RKE2 将 Kubernetes 服务安装为容器，因此 CIS Kubernetes Benchmark 中的许多管控验证检查都不适用，且结果会是 Not Applicable。本指南将介绍各种管控，并提供更新的示例命令来审核 Rancher 创建的集群的合规性。

本文档供 Rancher 开发、安全团队、审计员和决策者使用。

有关各个审核的更多详细信息，包括失败测试的理由和修正措施，你可以参考 CIS Kubernetes Benchmark v1.6 的对应内容。创建免费帐户后，你可以在 Center for Internet Security (CIS) 下载 Benchmark。

测试管控方法

RKE2 将 controlplane 组件作为由 kubelet 管理的静态 pod 启动，并使用 containerd 作为容器运行时。配置是通过初始化时传递给容器的参数或配置文件定义的。

如果管控审计与原始 CIS Benchmark 出现差异，针对 Rancher 提供的的审计命令可用于进行测试。执行测试时，你需要访问所有 RKE2 节点主机上的命令行。这些命令还使用了测试和评估测试结果所需的 kubectl（带有有效的配置文件）和 jq 工具。

备注

本指南仅介绍 automated 测试（以前称为 scored）。

管控

---

1.1Master 节点配置文件

1.1.1确保 API Server pod 规范文件权限具有 644 或更严格的设置（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml

审计：

stat -c %a /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml

预期结果：

'permissions' is not present

返回值：

644

1.1.2确保 API Server pod 规范文件所有权设置为 root:root（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml; then stat -c %U:%G /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml; fi'

预期结果：

'root:root' is equal to 'root:root'

返回值：

root:root

1.1.3确保 Controller Manager pod 规范文件权限具有 644 或更严格的设置（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml; then stat -c %a /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml; fi'

预期结果：

'644' is equal to '644'

返回值：

644

1.1.4确保 Controller Manager pod 规范文件所有权设置为 root:root（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml; then stat -c %U:%G /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml; fi'

预期结果：

'root:root' is equal to 'root:root'

返回值：

root:root

1.1.5确保 Scheduler pod 规范文件权限具有 644 或更严格的设置（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 /var/lib/rancher/rke2/agent/pod-manifests/kube-scheduler.yaml

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/pod-manifests/kube-scheduler.yaml; then stat -c %a /var/lib/rancher/rke2/agent/pod-manifests/kube-scheduler.yaml; fi'

预期结果：

'permissions' is not present

返回值：

644

1.1.6确保 Scheduler pod 规范文件所有权设置为 root:root（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root /var/lib/rancher/rke2/agent/pod-manifests/kube-scheduler.yaml

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/pod-manifests/kube-scheduler.yaml; then stat -c %U:%G /var/lib/rancher/rke2/agent/pod-manifests/kube-scheduler.yaml; fi'

预期结果：

'root:root' is present

返回值：

root:root

1.1.7确保 etcd pod 规范文件权限具有 644 或更严格的设置（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml; then stat -c %a /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml; fi'

预期结果：

'644' is equal to '644'

返回值：

644

1.1.8确保 etcd pod 规范文件所有权设置为 root:root（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml; then stat -c %U:%G /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml; fi'

预期结果：

'root:root' is equal to 'root:root'

返回值：

root:root

1.1.9确保容器网络接口文件权限设置为 644 或更严格的设置（手动）

结果：warn

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 <path/to/cni/files>

审计：

stat -c %a <path/to/cni/files>

1.1.10确保容器网络接口文件所有权设置为 root:root（手动）

结果：warn

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root <path/to/cni/files>

审计：

stat -c %U:%G <path/to/cni/files>

1.1.11确保 etcd 数据目录权限设置为 700 或更严格的设置（自动）

结果：pass

修正措施： 在 etcd 服务器节点上，通过以下命令获取 etcd 数据目录（作为 --data-dir 参数传递）。 ps -ef | grep etcd 基于上面找到的 etcd 数据目录运行以下命令。例如：chmod 700 /var/lib/etcd

审计：

stat -c %a /var/lib/rancher/rke2/server/db/etcd

预期结果：

'permissions' is not present

返回值：

700

1.1.12确保 etcd 数据目录所有权设置为 etcd:etcd（自动）

结果：pass

修正措施： 在 etcd 服务器节点上，通过以下命令获取 etcd 数据目录（作为 --data-dir 参数传递）。 ps -ef | grep etcd 基于上面找到的 etcd 数据目录运行以下命令。 例如：chown etcd:etcd /var/lib/etcd

审计：

stat -c %U:%G /var/lib/rancher/rke2/server/db/etcd

预期结果：

'etcd:etcd' is present

返回值：

etcd:etcd

1.1.13确保 admin.conf 文件权限具有 644 或更严格的设置（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 /etc/kubernetes/admin.conf

审计：

stat -c %a /var/lib/rancher/rke2/server/cred/admin.kubeconfig

预期结果：

'permissions' is not present

返回值：

644

1.1.14确保 admin.conf 文件所有权设置为 root:root（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root /etc/kubernetes/admin.conf

审计：

stat -c %U:%G /var/lib/rancher/rke2/server/cred/admin.kubeconfig

预期结果：

'root:root' is equal to 'root:root'

返回值：

root:root

1.1.15确保 scheduler.conf 文件权限具有 644 或更严格的设置（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 scheduler

审计：

stat -c %a /var/lib/rancher/rke2/server/cred/scheduler.kubeconfig

预期结果：

'permissions' is not present

返回值：

644

1.1.16确保 scheduler.conf 文件所有权设置为 root:root（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root scheduler

审计：

stat -c %U:%G /var/lib/rancher/rke2/server/cred/scheduler.kubeconfig

预期结果：

'root:root' is equal to 'root:root'

返回值：

root:root

1.1.17确保 controller-manager.conf 文件权限具有 644 或更严格的设置（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 controllermanager

审计：

stat -c %a /var/lib/rancher/rke2/server/cred/controller.kubeconfig

预期结果：

'permissions' is not present

返回值：

644

1.1.18确保将 controller-manager.conf 文件所有权设置为 root:root（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root controllermanager

审计：

stat -c %U:%G /var/lib/rancher/rke2/server/cred/controller.kubeconfig

预期结果：

'root:root' is equal to 'root:root'

返回值：

root:root

1.1.19确保 Kubernetes PKI 目录和文件所有权设置为 root:root（自动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chown -R root:root /etc/kubernetes/pki/

审计：

stat -c %U:%G /var/lib/rancher/rke2/server/tls

预期结果：

'root:root' is equal to 'root:root'

返回值：

root:root

1.1.20确保将 Kubernetes PKI 证书文件权限设置为 644 或更严格的设置（手动）

结果：warn

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod -R 644 /var/lib/rancher/rke2/server/tls/*.crt

审计脚本：check_files_permissions.sh

#!/usr/bin/env bash

# This script is used to ensure the file permissions are set to 644 or
# more restrictive for all files in a given directory or a wildcard
# selection of files
#
# inputs:
#   $1 = /full/path/to/directory or /path/to/fileswithpattern
#                                   ex: !(*key).pem
#
#   $2 (optional) = permission (ex: 600)
#
# outputs:
#   true/false

# Turn on "extended glob" for use of '!' in wildcard
shopt -s extglob

# Turn off history to avoid surprises when using '!'
set -H

USER_INPUT=$1

if [[ "${USER_INPUT}" == "" ]]; then
  echo "false"
  exit
fi


if [[ -d ${USER_INPUT} ]]; then
  PATTERN="${USER_INPUT}/*"
else
  PATTERN="${USER_INPUT}"
fi

PERMISSION=""
if [[ "$2" != "" ]]; then
  PERMISSION=$2
fi

FILES_PERMISSIONS=$(stat -c %n\ %a ${PATTERN})

while read -r fileInfo; do
  p=$(echo ${fileInfo} | cut -d' ' -f2)

  if [[ "${PERMISSION}" != "" ]]; then
    if [[ "$p" != "${PERMISSION}" ]]; then
      echo "false"
      exit
    fi
  else
    if [[ "$p" != "644" && "$p" != "640" && "$p" != "600" ]]; then
      echo "false"
      exit
    fi
  fi
done <<< "${FILES_PERMISSIONS}"


echo "true"
exit

审计执行：

./check_files_permissions.sh /var/lib/rancher/rke2/server/tls/*.crt

1.1.21确保 Kubernetes PKI 密钥文件权限设置为 600（手动）

结果：pass

修正措施： 在 Master 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod -R 600 /etc/kubernetes/pki/*.key

审计脚本：check_files_permissions.sh

#!/usr/bin/env bash

# This script is used to ensure the file permissions are set to 644 or
# more restrictive for all files in a given directory or a wildcard
# selection of files
#
# inputs:
#   $1 = /full/path/to/directory or /path/to/fileswithpattern
#                                   ex: !(*key).pem
#
#   $2 (optional) = permission (ex: 600)
#
# outputs:
#   true/false

# Turn on "extended glob" for use of '!' in wildcard
shopt -s extglob

# Turn off history to avoid surprises when using '!'
set -H

USER_INPUT=$1

if [[ "${USER_INPUT}" == "" ]]; then
  echo "false"
  exit
fi


if [[ -d ${USER_INPUT} ]]; then
  PATTERN="${USER_INPUT}/*"
else
  PATTERN="${USER_INPUT}"
fi

PERMISSION=""
if [[ "$2" != "" ]]; then
  PERMISSION=$2
fi

FILES_PERMISSIONS=$(stat -c %n\ %a ${PATTERN})

while read -r fileInfo; do
  p=$(echo ${fileInfo} | cut -d' ' -f2)

  if [[ "${PERMISSION}" != "" ]]; then
    if [[ "$p" != "${PERMISSION}" ]]; then
      echo "false"
      exit
    fi
  else
    if [[ "$p" != "644" && "$p" != "640" && "$p" != "600" ]]; then
      echo "false"
      exit
    fi
  fi
done <<< "${FILES_PERMISSIONS}"


echo "true"
exit

审计执行：

./check_files_permissions.sh /var/lib/rancher/rke2/server/tls/*.key

预期结果：

'permissions' is not present

返回值：

true

1.2API Server

1.2.1确保 --anonymous-auth 参数设置为 false（手动）

结果：warn

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml 并设置以下参数。 --anonymous-auth=false

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

1.2.2确保未设置 --basic-auth-file 参数（自动）

结果：pass

修正措施： 遵循文档并配置身份验证的替代机制。然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml 并移除 --basic-auth-file=<filename> 参数。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--basic-auth-file' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.3确保未设置 --token-auth-file 参数（自动）

结果：pass

修正措施： 遵循文档并配置身份验证的替代机制。然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml 并移除 --token-auth-file=<filename> 参数。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--token-auth-file' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.4确保 --kubelet-https 参数设置为 true（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml 并移除 --kubelet-https 参数。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--kubelet-https' is not present OR '--kubelet-https' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.5确保正确设置了 --kubelet-client-certificate 和 --kubelet-client-key 参数（自动）

结果：pass

修正措施： 遵循 Kubernetes 文档设置 apiserver 和 kubelets 的 TLS 连接。然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并设置以下 kubelet 客户端证书和密钥参数。 --kubelet-client-certificate=<path/to/client-certificate-file> --kubelet-client-key=<path/to/client-key-file>

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--kubelet-client-certificate' is present AND '--kubelet-client-key' is present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.6确保根据需要设置 --kubelet-certificate-authority 参数（自动）

结果：pass

修正措施： 遵循 Kubernetes 文档设置 apiserver 和 kubelets 的 TLS 连接。然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --kubelet-certificate-authority 参数设置为 CA 证书文件的路径。 --kubelet-certificate-authority=<ca-string>

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--kubelet-certificate-authority' is present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.7确保 --authorization-mode 参数未设置为 AlwaysAllow（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --authorization-mode 参数设置为 AlwaysAllow 以外的值。 示例如下。 --authorization-mode=RBAC

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'Node,RBAC' not have 'AlwaysAllow'

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.8确保 --authorization-mode 参数包括 Node（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --authorization-mode 参数设置为包含 Node 的值。 --authorization-mode=Node,RBAC

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'Node,RBAC' has 'Node'

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.9确保 --authorization-mode 参数包括 RBAC（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --authorization-mode 参数设置为包含 RBAC 的值。 例如：--authorization-mode=Node,RBAC

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'Node,RBAC' has 'RBAC'

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.10确保设置了准入控制插件 EventRateLimit（手动）

结果：warn

修正措施： 遵循 Kubernetes 文档并在配置文件中设置所需的限制。 然后，编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并设置以下参数。 --enable-admission-plugins=...,EventRateLimit,... --admission-control-config-file=<path/to/configuration/file>

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

1.2.11确保未设置准入控制插件 AlwaysAdmit（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并删除 --enable-admission-plugins 参数，或将其设置为不包含 AlwaysAdmit 的值。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'NodeRestriction,PodSecurityPolicy' not have 'AlwaysAdmit' OR '--enable-admission-plugins' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.12确保设置了准入控制插件 AlwaysPullImages（手动）

结果：warn

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --enable-admission-plugins 参数设置为包含 AlwaysPullImages。 --enable-admission-plugins=...,AlwaysPullImages,...

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

1.2.13如果没有使用 PodSecurityPolicy，请确保设置了准入控制插件 SecurityContextDeny（手动）

结果：warn

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --enable-admission-plugins 参数设置为包括 SecurityContextDeny，除非已设置了 PodSecurityPolicy。 --enable-admission-plugins=...,SecurityContextDeny,...

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

1.2.14确保设置了准入控制插件 ServiceAccount（自动）

结果：pass

修正措施： 遵循文档并根据你的环境创建 ServiceAccount 对象。 然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并确保 --disable-admission-plugins 参数设置为不包含 ServiceAccount 的值。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--disable-admission-plugins' is not present OR '--disable-admission-plugins' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.15确保设置了准入控制插件 NamespaceLifecycle（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并设置 --disable-admission-plugins 参数，确保它不包含 NamespaceLifecycle。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--disable-admission-plugins' is not present OR '--disable-admission-plugins' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.16确保设置了准入控制插件 PodSecurityPolicy（自动）

结果：pass

修正措施： 遵循文档并根据你的环境创建 Pod 安全策略对象。 然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --enable-admission-plugins 参数设置为包含 PodSecurityPolicy 的值： --enable-admission-plugins=...,PodSecurityPolicy,... 然后重新启动 API Server。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'NodeRestriction,PodSecurityPolicy' has 'PodSecurityPolicy'

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.17确保设置了准入控制插件 NodeRestriction（自动）

结果：pass

修正措施： 按照 Kubernetes 文档，在 kubelets 上配置 NodeRestriction 插件。 然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --enable-admission-plugins 参数设置为包含 NodeRestriction 的值。 --enable-admission-plugins=...,NodeRestriction,...

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'NodeRestriction,PodSecurityPolicy' has 'NodeRestriction'

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.18确保未设置 --insecure-bind-address 参数（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml 并移除 --insecure-bind-address 参数。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--insecure-bind-address' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.19确保 --insecure-port 参数设置为 0（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml 并设置以下参数。 --insecure-port=0

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'0' is equal to '0'

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.20确保 --secure-port 参数未设置为 0（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并删除 --secure-port 参数或将其设置为另一个所需端口（非零）。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

6443 is greater than 0 OR '--secure-port' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.21确保 --profiling 参数设置为 false（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml 并设置以下参数。 --profiling=false

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'false' is equal to 'false'

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.22确保设置了 --audit-log-path 参数（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --audit-log-path 参数设置为所需的路径以及要写入审计日志的文件。 例如：--audit-log-path=/var/log/apiserver/audit.log

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--audit-log-path' is present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.23确保将 --audit-log-maxage 参数设置为 30 或适当的数值（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --audit-log-maxage 参数设置为 30 或适当的天数： --audit-log-maxage=30

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

30 is greater or equal to 30

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.24确保 --audit-log-maxbackup 参数设置为 10 或适当的数值（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --audit-log-maxbackup 参数设置为 10 或适当的数值。 --audit-log-maxbackup=10

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

10 is greater or equal to 10

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.25确保 --audit-log-maxsize 参数设置为 100 或适当的数值（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --audit-log-maxsize 参数设置为适当的大小（以 MB 为单位）。 例如，要将其设置为 100 MB： --audit-log-maxsize=100

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

100 is greater or equal to 100

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.26确保能根据需要设置 --request-timeout 参数（自动）

结果：pass

修正措施： 编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并根据需要设置以下参数。 例如：--request-timeout=300s

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--request-timeout' is not present OR '--request-timeout' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.27确保 --service-account-lookup 参数设置为 true（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml 并设置以下参数。 --service-account-lookup=true

你也可以删除此文件的 --service-account-lookup 参数，从而使默认设置生效。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--service-account-lookup' is not present OR '--service-account-lookup' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.28确保根据需要设置 --service-account-key-file 参数（自动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并为 ServiceAccount 将 --service-account-key-file 参数设置为公钥文件： --service-account-key-file=<filename>

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--service-account-key-file' is present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.29确保根据需要设置 --etcd-certfile 和 --etcd-keyfile 参数（自动）

结果：pass

修正措施： 遵循 Kubernetes 文档设置 apiserver 和 etcd 的 TLS 连接。 然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并设置 etcd 证书和密钥文件参数。 --etcd-certfile=<path/to/client-certificate-file> --etcd-keyfile=<path/to/client-key-file>

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--etcd-certfile' is present AND '--etcd-keyfile' is present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.30确保根据需要设置 --tls-cert-file 和 --tls-private-key-file 参数（自动）

结果：pass

修正措施： 遵循 Kubernetes 文档并在 apiserver 上设置 TLS 连接。 然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并设置 TLS 证书和私钥文件参数。 --tls-cert-file=<path/to/tls-certificate-file> --tls-private-key-file=<path/to/tls-key-file>

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--tls-cert-file' is present AND '--tls-private-key-file' is present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.31确保根据需要设置 --client-ca-file 参数（自动）

结果：pass

修正措施： 遵循 Kubernetes 文档并在 apiserver 上设置 TLS 连接。 然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并设置客户端 CA 文件。 --client-ca-file=<path/to/client-ca-file>

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--client-ca-file' is present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.32确保 --etcd-cafile 参数设置正确（自动）

结果：pass

修正措施： 遵循 Kubernetes 文档设置 apiserver 和 etcd 的 TLS 连接。 然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并设置 etcd CA 文件参数。 --etcd-cafile=<path/to/ca-file>

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--etcd-cafile' is present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.33确保根据需要设置 --encryption-provider-config 参数（自动）

结果：pass

修正措施： 按照 Kubernetes 文档并配置 EncryptionConfig 文件。 然后，在 Master 节点上编辑 API Server pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-apiserver.yaml，并将 --encryption-provider-config 参数设置为该文件的路径： --encryption-provider-config=</path/to/EncryptionConfig/File>

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--encryption-provider-config' is present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.2.34确保正确配置加密提供程序（自动）

结果：pass

修正措施： 按照 Kubernetes 文档并配置 EncryptionConfig 文件。 在此文件中，选择 aescbc、kms 或 secretbox 作为加密提供程序。

审计：

/bin/sh -c 'if grep aescbc /var/lib/rancher/rke2/server/cred/encryption-config.json; then echo 0; fi'

预期结果：

'0' is present

返回值：

{"kind":"EncryptionConfiguration","apiVersion":"apiserver.config.k8s.io/v1","resources":[{"resources":["secrets"],"providers":[{"aescbc":{"keys":[{"name":"aescbckey","secret":"ZP3yNnlCjzcKMBXfmNBmpGbiY+oXne+WP6EM42lZIbE="}]}},{"identity":{}}]}]} 0

1.2.35确保 API Server 仅使用强密码（手动）

结果：pass

修正措施： 在 Master 节点上编辑 API Server pod 规范文件 /etc/kubernetes/manifests/kube-apiserver.yaml 并设置以下参数。 --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM _SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_AES_256_GCM _SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_AES_256_GCM _SHA384

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep

预期结果：

'--tls-cipher-suites' is not present

返回值：

root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.3Controller Manager

1.3.1确保正确设置 --terminated-pod-gc-threshold 参数（自动）

结果：pass

修正措施： 在 Master 节点上编辑 Controller Manager pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml，并将 --terminated-pod-gc-threshold 设置为适当的阈值。 例如：--terminated-pod-gc-threshold=10

审计：

/bin/ps -ef | grep kube-controller-manager | grep -v grep

预期结果：

'--terminated-pod-gc-threshold' is present

返回值：

root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.3.2确保 --profiling 参数设置为 false（自动）

结果：pass

修正措施： 在 Master 节点上编辑 Controller Manager pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml，并设置以下参数。 --profiling=false

审计：

/bin/ps -ef | grep kube-controller-manager | grep -v grep

预期结果：

'false' is equal to 'false'

返回值：

root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.3.3确保 --use-service-account-credentials 参数设置为 true（自动）

结果：pass

修正措施： 在 Master 节点上编辑 Controller Manager pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml 以设置以下参数。 --use-service-account-credentials=true

审计：

/bin/ps -ef | grep kube-controller-manager | grep -v grep

预期结果：

'true' is not equal to 'false'

返回值：

root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.3.4确保根据需要设置 --service-account-private-key-file 参数（自动）

结果：pass

修正措施： 在 Master 节点上编辑 Controller Manager pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml，并为 ServiceAccount 将 --service-account-private-key-file 参数设置为私钥文件。 --service-account-private-key-file=<filename>

审计：

/bin/ps -ef | grep kube-controller-manager | grep -v grep

预期结果：

'--service-account-private-key-file' is present

返回值：

root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.3.5确保根据需要设置 --root-ca-file 参数（自动）

结果：pass

修正措施： 在 Master 节点上编辑 Controller Manager pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml，并将 --root-ca-file 参数设置为证书绑定文件。 --root-ca-file=<path/to/file>

审计：

/bin/ps -ef | grep kube-controller-manager | grep -v grep

预期结果：

'--root-ca-file' is present

返回值：

root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.3.6确保 RotateKubeletServerCertificate 参数设置为 true（自动）

结果：Not Applicable

修正措施： 在 Master 节点上编辑 Controller Manager pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml，并将 --feature-gates 参数设置为包含 RotateKubeletServerCertificate=true。 --feature-gates=RotateKubeletServerCertificate=true

1.3.7确保 --bind-address 参数设置为 127.0.0.1（自动）

结果：pass

修正措施： 在 Master 节点上编辑 Controller Manager pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-controller-manager.yaml，并确保 --bind-address 参数的值正确。

审计：

/bin/ps -ef | grep kube-controller-manager | grep -v grep

预期结果：

'127.0.0.1' is equal to '127.0.0.1' OR '--bind-address' is not present

返回值：

root 5522 5416 3 14:58 ?00:00:16 kube-controller-manager --flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins --terminated-pod-gc-threshold=1000 --permit-port-sharing=true --address=127.0.0.1 --allocate-node-cidrs=true --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/rke2/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/rke2/server/tls/client-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --kubeconfig=/var/lib/rancher/rke2/server/cred/controller.kubeconfig --port=10252 --profiling=false --root-ca-file=/var/lib/rancher/rke2/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/rke2/server/tls/service.key --use-service-account-credentials=true

1.4Scheduler

1.4.1确保 --profiling 参数设置为 false（自动）

结果：pass

修正措施： 在 Master 节点上编辑 Scheduler pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-scheduler.yaml 文件，并设置以下参数。 --profiling=false

审计：

/bin/ps -ef | grep kube-scheduler | grep -v grep

预期结果：

'false' is equal to 'false'

返回值：

root 5533 5414 0 14:58 ?00:00:02 kube-scheduler --permit-port-sharing=true --address=127.0.0.1 --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-scheduler --kubeconfig=/var/lib/rancher/rke2/server/cred/scheduler.kubeconfig --port=10251 --profiling=false --secure-port=10259

1.4.2确保 --bind-address 参数设置为 127.0.0.1（自动）

结果：pass

修正措施： 在 Master 节点上编辑 Scheduler pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/kube-scheduler.yaml，并确保 --bind-address 参数的值正确。

审计：

/bin/ps -ef | grep kube-scheduler | grep -v grep

预期结果：

'127.0.0.1' is equal to '127.0.0.1' OR '--bind-address' is not present

返回值：

root 5533 5414 0 14:58 ?00:00:02 kube-scheduler --permit-port-sharing=true --address=127.0.0.1 --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/rke2/server/tls/kube-scheduler --kubeconfig=/var/lib/rancher/rke2/server/cred/scheduler.kubeconfig --port=10251 --profiling=false --secure-port=10259

2 Etcd Node Configuration Files

2.1确保根据需要设置 --cert-file 和 --key-file 参数（自动）

结果：Not Applicable

修正措施： 按照 etcd 服务文档配置 TLS 加密。 然后，在 Master 节点上编辑 etcd pod 规范文件 /etc/kubernetes/manifests/etcd.yaml，并设置以下参数。 --cert-file=</path/to/ca-file> --key-file=</path/to/key-file>

2.2确保 --client-cert-auth 参数设置为 true（自动）

结果：Not Applicable

修正措施： 在 Master 节点上编辑 etcd pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml，并设置以下参数。 --client-cert-auth="true"

2.3确保 --auto-tls 参数未设置为 true（自动）

结果：pass

修正措施： 在 Master 节点上编辑 etcd pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml，并删除 --auto-tls 参数或将其设置为 false。 --auto-tls=false

审计：

/bin/ps -ef | /bin/grep etcd | /bin/grep -v grep

预期结果：

'--auto-tls' is not present OR '--auto-tls' is not present

返回值：

etcd 5059 5033 0 14:58 ?00:00:00 /pause etcd 5121 5033 3 14:58 ?00:00:18 etcd --config-file=/var/lib/rancher/rke2/server/db/etcd/config root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 16473 16413 0 15:07 ?00:00:00 kube-bench run --targets etcd --scored --nosummary --noremediations --v=5 --config-dir=/etc/kube-bench/cfg --benchmark rke2-cis-1.6-hardened --json --log_dir /tmp/results/logs --outputfile /tmp/results/etcd.json

2.4确保根据需要设置 --peer-cert-file 和 --peer-key-file 参数（自动）

结果：Not Applicable

修正措施： 遵循 etcd 服务文档，根据需要为你的 etcd 集群配置对等 TLS 加密。 然后，在 Master 节点上编辑 etcd pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml，并设置以下参数。 --peer-client-file=</path/to/peer-cert-file> --peer-key-file=</path/to/peer-key-file>

2.5确保 --peer-client-cert-auth 参数设置为 true（自动）

结果：Not Applicable

修正措施： 在 Master 节点上编辑 etcd pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml，并设置以下参数。 --peer-client-cert-auth=true

2.6确保 --peer-auto-tls 参数未设置为 true（自动）

结果：pass

修正措施： 在 Master 节点上编辑 etcd pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml，并删除 --peer-auto-tls 参数或将其设置为 false。 --peer-auto-tls=false

审计：

/bin/ps -ef | /bin/grep etcd | /bin/grep -v grep

预期结果：

'--peer-auto-tls' is not present OR '--peer-auto-tls' is not present

返回值：

etcd 5059 5033 0 14:58 ?00:00:00 /pause etcd 5121 5033 3 14:58 ?00:00:18 etcd --config-file=/var/lib/rancher/rke2/server/db/etcd/config root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 16473 16413 6 15:07 ?00:00:00 kube-bench run --targets etcd --scored --nosummary --noremediations --v=5 --config-dir=/etc/kube-bench/cfg --benchmark rke2-cis-1.6-hardened --json --log_dir /tmp/results/logs --outputfile /tmp/results/etcd.json

2.7确保 etcd 使用唯一的 CA（手动）

结果：pass

修正措施： [手动测试] 遵循 etcd 文档，为 etcd 服务创建专用的 CA 设置。 然后，在 Master 节点上编辑 etcd pod 规范文件 /var/lib/rancher/rke2/agent/pod-manifests/etcd.yaml，并设置以下参数。 --trusted-ca-file=</path/to/ca-file>

审计：

/bin/ps -ef | /bin/grep etcd | /bin/grep -v grep

预期结果：

'--trusted-ca-file' is not present

返回值：

etcd 5059 5033 0 14:58 ?00:00:00 /pause etcd 5121 5033 3 14:58 ?00:00:18 etcd --config-file=/var/lib/rancher/rke2/server/db/etcd/config root 5275 5222 15 14:58 ?00:01:26 kube-apiserver --audit-policy-file=/etc/rancher/rke2/audit-policy.yaml --audit-log-path=/var/lib/rancher/rke2/server/logs/audit.log --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,rke2 --authorization-mode=Node,RBAC --bind-address=0.0.0.0 --cert-dir=/var/lib/rancher/rke2/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/rke2/server/tls/client-ca.crt --enable-admission-plugins=NodeRestriction,PodSecurityPolicy --encryption-provider-config=/var/lib/rancher/rke2/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/rke2/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/rke2/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/rke2/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --insecure-port=0 --kubelet-certificate-authority=/var/lib/rancher/rke2/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/rke2/server/tls/client-kube-apiserver.key --profiling=false --proxy-client-cert-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/rke2/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/rke2/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/rke2/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.crt --tls-private-key-file=/var/lib/rancher/rke2/server/tls/serving-kube-apiserver.key root 16473 16413 3 15:07 ?00:00:00 kube-bench run --targets etcd --scored --nosummary --noremediations --v=5 --config-dir=/etc/kube-bench/cfg --benchmark rke2-cis-1.6-hardened --json --log_dir /tmp/results/logs --outputfile /tmp/results/etcd.json

3.1认证和授权

3.1.1不能将客户端证书身份验证应用于用户（手动）

结果：warn

修正措施： Kubernetes 提供的替代机制（例如 OIDC）应该代替客户端证书的实现。

3.2Logging

3.2.1确保创建最小审计策略（自动）

结果：pass

修正措施： 为你的集群创建一个审计策略文件。

审计：

/bin/ps -ef | grep kube-apiserver | grep -v grep | grep -o audit-policy-file

预期结果：

'audit-policy-file' is equal to 'audit-policy-file'

返回值：

audit-policy-file

3.2.2确保审计策略涵盖关键安全问题（手动）

结果：warn

修正措施： 考虑修改集群上使用的审计策略，至少要包括这些项目。

4.1Worker 节点配置文件

4.1.1确保 kubelet 服务文件权限具有 644 或更严格的设置（自动）

结果：pass

修正措施： 在每个 Worker 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf

审计：

/bin/sh -c 'if test -e /etc/systemd/system/kubelet.service.d/10-kubeadm.conf; then stat -c permissions=%a /etc/systemd/system/kubelet.service.d/10-kubeadm.conf; fi'

预期结果：

'permissions' is not present

4.1.2确保 kubelet 服务文件所有权设置为 root:root（自动）

结果：Not Applicable

修正措施： 在每个 Worker 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root /etc/systemd/system/kubelet.service.d/10-kubeadm.conf

4.1.3如果代理 kubeconfig 文件存在，请确保权限具有 644 或更严格的设置（手动）

结果：pass

修正措施： 在每个 Worker 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 /var/lib/rancher/rke2/agent/kubeproxy.kubeconfig

审计：

/bin/sh -c 'if test -e /node/var/lib/rancher/rke2/agent/kubeproxy.kubeconfig; then stat -c %a /node/var/lib/rancher/rke2/agent/kubeproxy.kubeconfig; fi'

预期结果：

'permissions' is present OR '/var/lib/rancher/rke2/agent/kubeproxy.kubeconfig' is not present

返回值：

644

4.1.4确保代理 kubeconfig 文件所有权设置为 root:root（手动）

结果：pass

修正措施： 在每个 Worker 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root /var/lib/rancher/rke2/agent/kubeproxy.kubeconfig

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/kubeproxy.kubeconfig; then stat -c %U:%G /var/lib/rancher/rke2/agent/kubeproxy.kubeconfig; fi'

预期结果：

'root:root' is not present OR '/var/lib/rancher/rke2/agent/kubeproxy.kubeconfig' is not present

返回值：

root:root

4.1.5确保 --kubeconfig kubelet.conf 文件权限具有 644 或更严格的设置（自动）

结果：pass

修正措施： 在每个 Worker 节点上运行以下命令（基于系统上的文件位置）。 例如：chmod 644 /var/lib/rancher/rke2/agent/kubelet.kubeconfig

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/kubelet.kubeconfig; then stat -c permissions=%a /var/lib/rancher/rke2/agent/kubelet.kubeconfig; fi'

预期结果：

'644' is equal to '644'

返回值：

permissions=644

4.1.6确保 --kubeconfig kubelet.conf 文件所有权设置为 root:root（自动）

结果：pass

修正措施： 在每个 Worker 节点上运行以下命令（基于系统上的文件位置）。 例如：chown root:root /var/lib/rancher/rke2/agent/kubelet.kubeconfig

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/kubelet.kubeconfig; then stat -c %U:%G /var/lib/rancher/rke2/agent/kubelet.kubeconfig; fi'

预期结果：

'root:root' is equal to 'root:root'

返回值：

root:root

4.1.7确保 CA 文件权限具有 644 或更严格的设置（手动）

结果：warn

修正措施： 运行以下命令修改 --client-ca-file chmod 644 <filename> 的文件权限。

审计：

stat -c %a /var/lib/rancher/rke2/server/tls/server-ca.crt

4.1.8确保客户端 CA 文件所有权设置为 root:root（自动）

结果：pass

修正措施： 运行以下命令来修改 --client-ca-file 的所有权。 chown root:roset: trueot <filename>

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/client-ca.crt; then stat -c %U:%G /var/lib/rancher/rke2/agent/client-ca.crt; fi'

预期结果：

'root:root' is equal to 'root:root'

返回值：

root:root

4.1.9确保 kubelet --config 配置文件权限具有 644 或更严格的设置（自动）

结果：pass

修正措施： 运行以下命令（使用审计步骤中确定的配置文件位置）： chmod 644 /var/lib/rancher/rke2/agent/kubelet.kubeconfig

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/kubelet.kubeconfig; then stat -c permissions=%a /var/lib/rancher/rke2/agent/kubelet.kubeconfig; fi'

预期结果：

'644' is equal to '644'

返回值：

permissions=644

4.1.10确保 kubelet --config 配置文件所有权设置为 root:root（自动）

结果：pass

修正措施： 运行以下命令（使用审计步骤中确定的配置文件位置）： chown root:root /var/lib/rancher/rke2/agent/kubelet.kubeconfig

审计：

/bin/sh -c 'if test -e /var/lib/rancher/rke2/agent/kubelet.kubeconfig; then stat -c %U:%G /var/lib/rancher/rke2/agent/kubelet.kubeconfig; fi'

预期结果：

'root:root' is present

返回值：

root:root

4.2Kubelet

4.2.1确保将 anonymous-auth 参数设置为 false（自动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑该文件，将 authentication: anonymous 设置为 false。 如果使用可执行参数，请在每个 Worker 节点中编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并在 KUBELET_SYSTEM_PODS_ARGS 变量中设置以下参数。 --anonymous-auth=false 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'false' is equal to 'false'

返回值：

UID PID PPID C STIME TTY TIME CMD root 4785 4751 3 14:58 ?00:00:21 kubelet --volume-plugin-dir=/var/lib/kubelet/volumeplugins --file-check-frequency=5s --sync-frequency=30s --address=0.0.0.0 --alsologtostderr=false --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=cgroupfs --client-ca-file=/var/lib/rancher/rke2/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --container-runtime=remote --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=<node_ip> --kubeconfig=/var/lib/rancher/rke2/agent/kubelet.kubeconfig --log-file-max-size=50 --log-file=/var/lib/rancher/rke2/agent/logs/kubelet.log --logtostderr=false --node-labels=cattle.io/os=linux,rke.cattle.io/machine=7c32844c-359f-45f7-88c5-a7173d27690a --pod-manifest-path=/var/lib/rancher/rke2/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --stderrthreshold=FATAL --tls-cert-file=/var/lib/rancher/rke2/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/rke2/agent/serving-kubelet.key

4.2.2确保 --authorization-mode 参数未设置为 AlwaysAllow（自动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑该文件，将 authorization: mode 设置为 Webhook。如果使用可执行参数，请在每个 Worker 节点中编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并在 KUBELET_AUTHZ_ARGS 变量中设置以下参数。 --authorization-mode=Webhook 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'' is not present

返回值：

apiVersion: v1 clusters: - cluster: server: https://127.0.0.1:6443 certificate-authority: /var/lib/rancher/rke2/agent/server-ca.crt name: local contexts: - context: cluster: local namespace: default user: user name: Default current-context: Default kind: Config preferences: {} users: - name: user user: client-certificate: /var/lib/rancher/rke2/agent/client-kubelet.crt client-key: /var/lib/rancher/rke2/agent/client-kubelet.key

4.2.3确保根据需要设置 --client-ca-file 参数（自动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑文件，将 authentication: x509: clientCAFile 设置为客户端 CA 文件的位置。 如果使用命令行参数，请在每个 Worker 节点中编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并在 KUBELET_AUTHZ_ARGS 变量中设置以下参数。 --client-ca-file=<path/to/client-ca-file> 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'' is not present

返回值：

apiVersion: v1 clusters: - cluster: server: https://127.0.0.1:6443 certificate-authority: /var/lib/rancher/rke2/agent/server-ca.crt name: local contexts: - context: cluster: local namespace: default user: user name: Default current-context: Default kind: Config preferences: {} users: - name: user user: client-certificate: /var/lib/rancher/rke2/agent/client-kubelet.crt client-key: /var/lib/rancher/rke2/agent/client-kubelet.key

4.2.4确保 --read-only-port 参数设置为 0（自动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑该文件，将 readOnlyPort 设置为 0。 如果使用命令行参数，请在每个 Worker 节点中编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并在 KUBELET_SYSTEM_PODS_ARGS 变量中设置以下参数。 --read-only-port=0 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'0' is equal to '0' AND '--read-only-port' is present

返回值：

UID PID PPID C STIME TTY TIME CMD root 4785 4751 3 14:58 ?00:00:21 kubelet --volume-plugin-dir=/var/lib/kubelet/volumeplugins --file-check-frequency=5s --sync-frequency=30s --address=0.0.0.0 --alsologtostderr=false --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=cgroupfs --client-ca-file=/var/lib/rancher/rke2/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --container-runtime=remote --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=<node_ip> --kubeconfig=/var/lib/rancher/rke2/agent/kubelet.kubeconfig --log-file-max-size=50 --log-file=/var/lib/rancher/rke2/agent/logs/kubelet.log --logtostderr=false --node-labels=cattle.io/os=linux,rke.cattle.io/machine=7c32844c-359f-45f7-88c5-a7173d27690a --pod-manifest-path=/var/lib/rancher/rke2/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --stderrthreshold=FATAL --tls-cert-file=/var/lib/rancher/rke2/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/rke2/agent/serving-kubelet.key

4.2.5确保 --streaming-connection-idle-timeout 参数未设置为 0（自动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑该文件，将 streamingConnectionIdleTimeout 设置为 0 以外的值。 如果使用命令行参数，请在每个 Worker 节点中编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并在 KUBELET_SYSTEM_PODS_ARGS 变量中设置以下参数。 --streaming-connection-idle-timeout=5m 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'--streaming-connection-idle-timeout' is not present OR '--streaming-connection-idle-timeout' is present

返回值：

UID PID PPID C STIME TTY TIME CMD root 4785 4751 3 14:58 ?00:00:21 kubelet --volume-plugin-dir=/var/lib/kubelet/volumeplugins --file-check-frequency=5s --sync-frequency=30s --address=0.0.0.0 --alsologtostderr=false --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=cgroupfs --client-ca-file=/var/lib/rancher/rke2/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --container-runtime=remote --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=<node_ip> --kubeconfig=/var/lib/rancher/rke2/agent/kubelet.kubeconfig --log-file-max-size=50 --log-file=/var/lib/rancher/rke2/agent/logs/kubelet.log --logtostderr=false --node-labels=cattle.io/os=linux,rke.cattle.io/machine=7c32844c-359f-45f7-88c5-a7173d27690a --pod-manifest-path=/var/lib/rancher/rke2/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --stderrthreshold=FATAL --tls-cert-file=/var/lib/rancher/rke2/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/rke2/agent/serving-kubelet.key

4.2.6确保 --protect-kernel-defaults 参数设置为 true（自动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑该文件以设置 protectKernelDefaults: true。 如果使用命令行参数，请在每个 Worker 节点中编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并在 KUBELET_SYSTEM_PODS_ARGS 变量中设置以下参数。 --protect-kernel-defaults=true 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'' is not present

返回值：

apiVersion: v1 clusters: - cluster: server: https://127.0.0.1:6443 certificate-authority: /var/lib/rancher/rke2/agent/server-ca.crt name: local contexts: - context: cluster: local namespace: default user: user name: Default current-context: Default kind: Config preferences: {} users: - name: user user: client-certificate: /var/lib/rancher/rke2/agent/client-kubelet.crt client-key: /var/lib/rancher/rke2/agent/client-kubelet.key

4.2.7确保 --make-iptables-util-chains 参数设置为 true（自动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑该文件以设置 makeIPTablesUtilChains: true。 如果使用命令行参数，请在每个 Worker 节点上编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并删除 KUBELET_SYSTEM_PODS_ARGS 变量中的 --make-iptables-util-chains 参数。 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'--make-iptables-util-chains' is not present OR '--make-iptables-util-chains' is not present

返回值：

UID PID PPID C STIME TTY TIME CMD root 4785 4751 3 14:58 ?00:00:21 kubelet --volume-plugin-dir=/var/lib/kubelet/volumeplugins --file-check-frequency=5s --sync-frequency=30s --address=0.0.0.0 --alsologtostderr=false --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=cgroupfs --client-ca-file=/var/lib/rancher/rke2/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --container-runtime=remote --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=<node_ip> --kubeconfig=/var/lib/rancher/rke2/agent/kubelet.kubeconfig --log-file-max-size=50 --log-file=/var/lib/rancher/rke2/agent/logs/kubelet.log --logtostderr=false --node-labels=cattle.io/os=linux,rke.cattle.io/machine=7c32844c-359f-45f7-88c5-a7173d27690a --pod-manifest-path=/var/lib/rancher/rke2/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --stderrthreshold=FATAL --tls-cert-file=/var/lib/rancher/rke2/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/rke2/agent/serving-kubelet.key

4.2.8确保未设置 --hostname-override 参数（手动）

结果：warn

修正措施： 在每个 Worker 节点上编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并删除 KUBELET_SYSTEM_PODS_ARGS 变量中的 --hostname-override 参数。 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

4.2.9确保 --event-qps 参数设置为 0 或能适当抓取事件的级别（手动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑该文件以将 eventRecordQPS 设置为适当的级别。 如果使用命令行参数，请在每个 Worker 节点中编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并在 KUBELET_SYSTEM_PODS_ARGS 变量中设置以下参数。 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'--event-qps' is not present

返回值：

UID PID PPID C STIME TTY TIME CMD root 4785 4751 3 14:58 ?00:00:21 kubelet --volume-plugin-dir=/var/lib/kubelet/volumeplugins --file-check-frequency=5s --sync-frequency=30s --address=0.0.0.0 --alsologtostderr=false --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=cgroupfs --client-ca-file=/var/lib/rancher/rke2/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --container-runtime=remote --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=<node_ip> --kubeconfig=/var/lib/rancher/rke2/agent/kubelet.kubeconfig --log-file-max-size=50 --log-file=/var/lib/rancher/rke2/agent/logs/kubelet.log --logtostderr=false --node-labels=cattle.io/os=linux,rke.cattle.io/machine=7c32844c-359f-45f7-88c5-a7173d27690a --pod-manifest-path=/var/lib/rancher/rke2/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --stderrthreshold=FATAL --tls-cert-file=/var/lib/rancher/rke2/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/rke2/agent/serving-kubelet.key

4.2.10确保根据需要设置 --tls-cert-file 和 --tls-private-key-file 参数（自动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑该文件以将 tlsCertFile 设置为证书文件的位置来使用 Kubelet 的标识符，并将 tlsPrivateKeyFile 设置为对应的私钥文件的位置。 如果使用命令行参数，请在每个 Worker 节点中编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并在 KUBELET_CERTIFICATE_ARGS 变量中设置以下参数。 --tls-cert-file=<path/to/tls-certificate-file> --tls-private-key-file=<path/to/tls-key-file> 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'--tls-cert-file' is present AND '--tls-private-key-file' is present

返回值：

UID PID PPID C STIME TTY TIME CMD root 4785 4751 3 14:58 ?00:00:21 kubelet --volume-plugin-dir=/var/lib/kubelet/volumeplugins --file-check-frequency=5s --sync-frequency=30s --address=0.0.0.0 --alsologtostderr=false --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=cgroupfs --client-ca-file=/var/lib/rancher/rke2/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --container-runtime=remote --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=<node_ip> --kubeconfig=/var/lib/rancher/rke2/agent/kubelet.kubeconfig --log-file-max-size=50 --log-file=/var/lib/rancher/rke2/agent/logs/kubelet.log --logtostderr=false --node-labels=cattle.io/os=linux,rke.cattle.io/machine=7c32844c-359f-45f7-88c5-a7173d27690a --pod-manifest-path=/var/lib/rancher/rke2/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --stderrthreshold=FATAL --tls-cert-file=/var/lib/rancher/rke2/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/rke2/agent/serving-kubelet.key

4.2.11确保 --rotate-certificates 参数未设置为 false（手动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑文件以添加行 rotateCertificates: true，或完全删除它以使用默认值。 如果使用命令行参数，请在每个 Worker 节点上编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并删除 KUBELET_CERTIFICATE_ARGS 变量中的 --rotate-certificates=false 参数。 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'--rotate-certificates' is not present OR '--rotate-certificates' is not present

返回值：

UID PID PPID C STIME TTY TIME CMD root 4785 4751 3 14:58 ?00:00:21 kubelet --volume-plugin-dir=/var/lib/kubelet/volumeplugins --file-check-frequency=5s --sync-frequency=30s --address=0.0.0.0 --alsologtostderr=false --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=cgroupfs --client-ca-file=/var/lib/rancher/rke2/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --container-runtime=remote --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=<node_ip> --kubeconfig=/var/lib/rancher/rke2/agent/kubelet.kubeconfig --log-file-max-size=50 --log-file=/var/lib/rancher/rke2/agent/logs/kubelet.log --logtostderr=false --node-labels=cattle.io/os=linux,rke.cattle.io/machine=7c32844c-359f-45f7-88c5-a7173d27690a --pod-manifest-path=/var/lib/rancher/rke2/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --stderrthreshold=FATAL --tls-cert-file=/var/lib/rancher/rke2/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/rke2/agent/serving-kubelet.key

4.2.12验证 RotateKubeletServerCertificate 参数是否设置为 true（手动）

结果：pass

修正措施： 在每个 Worker 节点上编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并在 KUBELET_CERTIFICATE_ARGS 变量中设置以下参数。 --feature-gates=RotateKubeletServerCertificate=true 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'RotateKubeletServerCertificate' is not present

返回值：

UID PID PPID C STIME TTY TIME CMD root 4785 4751 3 14:58 ?00:00:21 kubelet --volume-plugin-dir=/var/lib/kubelet/volumeplugins --file-check-frequency=5s --sync-frequency=30s --address=0.0.0.0 --alsologtostderr=false --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=cgroupfs --client-ca-file=/var/lib/rancher/rke2/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --container-runtime=remote --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=<node_ip> --kubeconfig=/var/lib/rancher/rke2/agent/kubelet.kubeconfig --log-file-max-size=50 --log-file=/var/lib/rancher/rke2/agent/logs/kubelet.log --logtostderr=false --node-labels=cattle.io/os=linux,rke.cattle.io/machine=7c32844c-359f-45f7-88c5-a7173d27690a --pod-manifest-path=/var/lib/rancher/rke2/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --stderrthreshold=FATAL --tls-cert-file=/var/lib/rancher/rke2/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/rke2/agent/serving-kubelet.key

4.2.13确保 Kubelet 仅使用强密码（手动）

结果：pass

修正措施： 如果使用 Kubelet 配置文件，请编辑该文件以将 TLSCipherSuites 设置为 TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_128_GCM_SHA256 或这些值的子集。 如果使用可执行参数，请在每个 Worker 节点上编辑 kubelet 服务文件 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf，并将 --tls-cipher-suites 参数设置如下值，或这些值的子集。 --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_128_GCM_SHA256 根据你的系统，重新启动 kubelet 服务。例如： systemctl daemon-reload systemctl restart kubelet.service

审计：

/bin/ps -fC kubelet

审计配置：

/bin/cat /var/lib/rancher/rke2/agent/kubelet.kubeconfig

预期结果：

'--tls-cipher-suites' is not present

返回值：

UID PID PPID C STIME TTY TIME CMD root 4785 4751 3 14:58 ?00:00:21 kubelet --volume-plugin-dir=/var/lib/kubelet/volumeplugins --file-check-frequency=5s --sync-frequency=30s --address=0.0.0.0 --alsologtostderr=false --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=cgroupfs --client-ca-file=/var/lib/rancher/rke2/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --container-runtime=remote --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=<node_ip> --kubeconfig=/var/lib/rancher/rke2/agent/kubelet.kubeconfig --log-file-max-size=50 --log-file=/var/lib/rancher/rke2/agent/logs/kubelet.log --logtostderr=false --node-labels=cattle.io/os=linux,rke.cattle.io/machine=7c32844c-359f-45f7-88c5-a7173d27690a --pod-manifest-path=/var/lib/rancher/rke2/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --stderrthreshold=FATAL --tls-cert-file=/var/lib/rancher/rke2/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/rke2/agent/serving-kubelet.key

5.1RBAC 和 ServiceAccount

5.1.1确保仅在需要时使用 cluster-admin 角色（手动）

结果：warn

修正措施： 识别 cluster-admin 角色的所有 clusterrolebindings。检查它们是否被使用，它们是否需要这个角色，或者是否可以使用较低权限的角色。 在可能的情况下，先将用户绑定到较低权限的角色，然后删除绑定到 cluster-admin 角色的 clusterrolebinding： kubectl delete clusterrolebinding [name]

5.1.2尽量减少对密文的访问（手动）

结果：warn

修正措施： 在可能的情况下，删除对集群中密文对象的 get、list 和 watch 访问。

5.1.3尽量减少角色和 ClusterRoles 中通配符的使用（手动）

结果：warn

修正措施： 在可能的情况下，将集群角色和角色中的通配符替换为特定的对象或动作。

5.1.4尽量减少创建 pod 的访问（手动）

结果：warn

修正措施： 在可能的情况下，删除对集群中 pod 对象的创建访问权限。

5.1.5确保未主动使用默认 ServiceAccount。（自动）

结果：pass

修正措施： 在 Kubernetes 工作负载需要对 Kubernetes API Server 进行特定访问时，创建显式的 ServiceAccount。 修改每个默认 ServiceAccount 的配置以包含此值 automountServiceAccountToken: false

审计脚本：check_for_default_sa.sh

#!/bin/bash

set -eE

handle_error() {
    echo "false"
}

trap 'handle_error' ERR

count_sa=$(kubectl get serviceaccounts --all-namespaces -o json | jq -r '.items[] | select(.metadata.name=="default") | select((.automountServiceAccountToken == null) or (.automountServiceAccountToken == true))' | jq .metadata.namespace | wc -l)
if [[ ${count_sa} -gt 0 ]]; then
    echo "false"
    exit
fi

for ns in $(kubectl get ns --no-headers -o custom-columns=":metadata.name")
do
    for result in $(kubectl get clusterrolebinding,rolebinding -n $ns -o json | jq -r '.items[] | select((.subjects[].kind=="ServiceAccount" and .subjects[].name=="default") or (.subjects[].kind=="Group" and .subjects[].name=="system:serviceaccounts"))' | jq -r '"\(.roleRef.kind),\(.roleRef.name)"')
    do
        read kind name <<<$(IFS=","; echo $result)
        resource_count=$(kubectl get $kind $name -n $ns -o json | jq -r '.rules[] | select(.resources[] != "podsecuritypolicies")' | wc -l)
        if [[ ${resource_count} -gt 0 ]]; then
            echo "false"
            exit
        fi
    done
done


echo "true"

审计执行：

./check_for_default_sa.sh

预期结果：

'true' is equal to 'true'

返回值：

true

5.1.6确保仅在必要时挂载 ServiceAccount 令牌（手动）

结果：warn

修正措施： 修改不需要挂载 ServiceAccount 令牌的 pod 和 ServiceAccount 的定义，使其禁用。

5.2Pod 安全策略

5.2.1最小化特权容器的准入（自动）

结果：pass

修正措施： 按照 Kubernetes 文档中的说明创建 PSP，确保 .spec.privileged 字段被省略或设置为 false。

审计：

kubectl get psp global-restricted-psp -o json | jq -r '.spec.runAsUser.rule'

预期结果：

'MustRunAsNonRoot' is equal to 'MustRunAsNonRoot'

返回值：

MustRunAsNonRoot

5.2.2最小化需要共享主机进程 ID 命名空间的容器准入（自动）

结果：pass

修正措施： 按照 Kubernetes 文档中的说明创建 PSP，确保 .spec.hostPID 字段被省略或设置为 false。

审计：

kubectl get psp -o json | jq .items[] | jq -r 'select((.spec.hostPID == null) or (.spec.hostPID == false))' | jq .metadata.name | wc -l | xargs -I {} echo '--count={}'

预期结果：

1 is greater than 0

返回值：

--count=1

5.2.3最小化需要共享主机 IPC 命名空间的容器准入（自动）

结果：pass

修正措施： 按照 Kubernetes 文档中的说明创建 PSP，确保 .spec.hostIPC 字段被省略或设置为 false。

审计：

kubectl get psp -o json | jq .items[] | jq -r 'select((.spec.hostIPC == null) or (.spec.hostIPC == false))' | jq .metadata.name | wc -l | xargs -I {} echo '--count={}'

预期结果：

1 is greater than 0

返回值：

--count=1

5.2.4最小化需要共享主机网络命名空间的容器准入（自动）

结果：pass

修正措施： 按照 Kubernetes 文档中的说明创建 PSP，确保 .spec.hostNetwork 字段被省略或设置为 false。

审计：

kubectl get psp -o json | jq .items[] | jq -r 'select((.spec.hostNetwork == null) or (.spec.hostNetwork == false))' | jq .metadata.name | wc -l | xargs -I {} echo '--count={}'

预期结果：

1 is greater than 0

返回值：

--count=1

5.2.5使用 allowPrivilegeEscalation（自动）最小化容器的准入

结果：pass

修正措施： 按照 Kubernetes 文档中的说明创建 PSP，确保 .spec.allowPrivilegeEscalation 字段被省略或设置为 false。

审计：

kubectl get psp -o json | jq .items[] | jq -r 'select((.spec.allowPrivilegeEscalation == null) or (.spec.allowPrivilegeEscalation == false))' | jq .metadata.name | wc -l | xargs -I {} echo '--count={}'

预期结果：

1 is greater than 0

返回值：

--count=1

5.2.6最小化根容器的准入（自动）

结果：pass

修正措施： 按照 Kubernetes 文档中的说明创建 PSP，确保 .spec.runAsUser.rule 设置为 MustRunAsNonRoot 或 MustRunAs，范围为不包括 0 的 UID。

审计：

kubectl get psp -o json | jq .items[] | jq -r 'select((.spec.allowPrivilegeEscalation == null) or (.spec.allowPrivilegeEscalation == false))' | jq .metadata.name | wc -l | xargs -I {} echo '--count={}'

预期结果：

1 is greater than 0

返回值：

--count=1

5.2.7使用 NET_RAW 功能最大限度地减少容器的准入（手动）

结果：pass

修正措施： 按照 Kubernetes 文档中的说明创建 PSP，确保 .spec.requiredDropCapabilities 包括 NET_RAW 或 ALL。

审计：

kubectl get psp global-restricted-psp -o json | jq -r .spec.requiredDropCapabilities[]

预期结果：

'ALL' is equal to 'ALL'

返回值：

ALL

5.2.8使用添加的功能最大限度地减少容器的准入（手动）

结果：warn

修正措施： 确保集群的 PSP 中不存在 allowedCapabilities，除非它被设置为一个空数组。

5.2.9使用分配的功能最大限度地减少容器的准入（手动）

结果：warn

修正措施： 查看集群上运行的应用程序中功能的使用情况。如果一个命名空间包含不需要任何 Linux 功能的应用，你可以考虑添加一个 PSP，禁止不丢弃所有功能的容器的准入。

5.3网络策略和 ​​CNI

5.3.1确保使用的 CNI 支持网络策略（自动）

结果：pass

修正措施： 如果使用的 CNI 插件不支持网络策略，则应考虑使用不同的插件，或在 Kubernetes 集群中寻找替代机制来限制流量。

审计：

kubectl get pods -n kube-system -l k8s-app=canal -o json | jq .items[] | jq .metadata.name | wc -l | xargs -I {} echo '--count={}'

预期结果：

1 is greater than 0

返回值：

--count=1

5.3.2确保所有命名空间都定义了网络策略（自动）

结果：pass

修正措施： 遵循文档并根据需要创建 NetworkPolicy 对象。

Audit Script: check_for_rke2_network_policies.sh

#!/bin/bash

set -eE

handle_error() {
    echo "false"
}

trap 'handle_error' ERR

for namespace in kube-system kube-public default; do
  policy_count=$(/var/lib/rancher/rke2/bin/kubectl get networkpolicy -n ${namespace} -o json | jq -r '.items | length')
  if [ ${policy_count} -eq 0 ]; then
    echo "false"
    exit
  fi
done

echo "true"

审计执行：

./check_for_rke2_network_policies.sh

预期结果：

'true' is equal to 'true'

返回值：

true

5.4密文管理

5.4.1优先使用密文文件而不是密文环境变量（手动）

结果：warn

修正措施： 如果可能，重写应用程序代码，从挂载的密文文件而不是环境变量中读取密文。

5.4.2考虑外部密文存储（手动）

结果：warn

修正措施： 请参阅你的云提供商或第三方密文管理解决方案的密文管理选项。

5.5可扩展准入控制

5.5.1使用 ImagePolicyWebhook 准入控制器配置镜像来源（手动）

结果：warn

修正措施： 遵循 Kubernetes 文档并设置镜像来源。

5.6v1.5.1 指南跳过 5.6 并从 5.5 转到 5.7。我们将它包含在这里只是为了进行解释。

5.7通用策略

5.7.1使用命名空间在资源之间创建管理边界（手动）

结果：warn

修正措施： 遵循文档并根据需要为 Deployment 中的对象创建命名空间。

5.7.2确保 seccomp 配置文件在你的 pod 定义中设置为 docker/default（手动）

结果：warn

修正措施： Seccomp 目前是一个 alpha 功能。默认情况下，所有 alpha 功能都是禁用的。因此，你需要通过传入 --feature- gates=AllAlpha=true 参数来启用 apiserver 中的 alpha 功能。 编辑 Master 节点上的 /etc/kubernetes/apiserver 文件，并将 KUBE_API_ARGS 参数设置为 --feature-gates=AllAlpha=true KUBE_API_ARGS="--feature-gates=AllAlpha=true" 根据你的系统，重新启动 kube-apiserver 服务。例如：systemctl restart kube-apiserver.service 使用注释在你的 pod 定义中启用 docker/default seccomp 配置文件。以下是一个示例： apiVersion: v1 kind: Pod metadata: name: trustworthy-pod annotations: seccomp.security.alpha.kubernetes.io/pod: docker/default spec: containers:

• name: trustworthy-container image: sotrustworthy:latest

5.7.3将安全上下文应用到你的 Pod 和容器（自动）

结果：warn

修正措施： 遵循 Kubernetes 文档，将安全上下文应用到你的 pod。关于安全上下文的建议清单，你可以参考 CIS 的 Docker 容器安全 Benchmark。

5.7.4确保不使用 Default 命名空间（手动）

结果：warn

修正措施： 确保创建命名空间以允许对 Kubernetes 进行适当的隔离资源，并且所有新资源都创建在特定的命名空间中。